Results 1 to 6 of 6
-
Username ProtectedStar Contributor
- Posts
- 753 Posts
- Thanked 515 times
- Phenom 300 Owner & Pilot
- Join Date
- Joined Oct 2020
08-24-2023, 08:31 AM#1
Proposed AD for P300 Refreshment Center Reinforcement
The FAA today proposed an AD for P300 which requires operators to "install reinforcements on the RH refreshment center and LH forward cabinet, and to replace rivets of the floor support of the RH Refreshment Center".
It is based on ANAC AD 2023–05–03 (attached), which itself is based on SB505-25-0046.
The ANAC AD gives 36 mo to comply, I am assuming the FAA one will have a similar timeline.
The FAA proposes to adopt a new airworthiness directive (AD) for certain Embraer S.A. (Embraer) Model EMB–505 airplanes. This proposed AD was prompted by analysis of certain monuments (the right-hand refreshment center and left-hand forward cabinet) that identified the need for installing structural reinforcements and replacing certain floor support rivets. This proposed AD would require installing structural reinforcements on certain monuments and replacing certain floor support rivets, as specified in an Agência Nacional de Aviação Civil (ANAC) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products. -
Username ProtectedMember
- Posts
- 73 Posts
- Thanked 25 times
- Phenom Instructor/Mentor
- Join Date
- Joined Oct 2020
03-04-2024, 05:32 PM #4Heads up! (Phenom 300)
19 Feb 2024, Revision 2 came out and it's kind of a big deal. The original SB was issued 31 Mar 2021, and compliance time was "at the next 60 month inspection". Revision 2 changes that to "within 36 months from the original issue date" !!!! That means March 2024.
But Embraer is (not) prepared - they tell my service center parts aren't available until July. -
Username ProtectedReally Frequent Poster
- Posts
- 203 Posts
- Thanked 104 times
- Phenom 300 Owner & Pilot
- Join Date
- Joined Nov 2020
04-16-2024, 09:52 AM #5As noted on a previous thread, I had my interior overhauled in February. Would have been an excellent time to implement SB 25-0046; however, as noted above there are no parts. I checked yesterday and the "top kits" for "group 3" are pushed out to Q4.
One other item that had me confused for a bit. There is an almost identical SB 25-0044 which affects the LEFT Forward Cabinet or the LEFT Refreshment Center. This AD was incorporated at my 10Y in 2021, thus, I only need to comply with the RIGHT Refreshement Center of SB 25-0046. Check your maintenance logs to see if your aircraft already incorporated SB 25-0044 to keep from duplicating work.
- Quick Links
- New Posts
- Participated
- Subscribed
- Today's Posts
- Hot This Week