Results 1 to 19 of 19
-
Username ProtectedMember
- Posts
- 5 Posts
- Thanked 0 times
- Phenom 100 Owner & Pilot
- Join Date
- Joined Apr 2022
01-04-2024, 08:19 AM#1
CMC and enginedata
Dear all,
one more question. We are required to submit engine data to CAMP on our P100 with G3000.
When I go to CMC download there are multiple data:
CAS CMC ENGINE
ENGINE
CAS CMC ENGINE AUTO
CRITICAL
FOQA
TAKEOFF AND LANDING
Garmin Alerts
Can somebody exaplain which are good for what please?I am unable to find any info.
Also some of them can be somehow set to be sent via WIFI or Iridium (we do not have susbcription yet). But can we just send it over wifi without need to login, download to SD card and send via email?
Ideally automatically over wifi when we taxi to hangar.
There is really no info regarding those features
Thanks a lot -
Username ProtectedFrequent Poster
- Posts
- 85 Posts
- Thanked 50 times
- Phenom 100 Owner & Pilot
- Join Date
- Joined Oct 2020
01-04-2024, 05:19 PM #3(Username Protected),
Have a similar issue as (Username Protected), but I have G1000 NXi. Im using FlySto but not sure get all data needed for this from the G1000 in an easy way.
(Username Protected) -
Username ProtectedMember
- Posts
- 38 Posts
- Thanked 9 times
- Phenom 300 Owner & Pilot
- Join Date
- Joined Apr 2023
01-04-2024, 05:49 PM #4https://www.air-sync.com/store/
This is air-sync it works with G1000 and G3000 -
Username ProtectedFrequent Poster
- Posts
- 85 Posts
- Thanked 50 times
- Phenom 100 Owner & Pilot
- Join Date
- Joined Oct 2020
01-05-2024, 11:45 AM #5From the webpage:
Embraer
- Phenom 100EV with Garmin G3000 NXi
- Phenom 300 with Garmin G1000 NXi Retrofit
- Phenom 300 with Garmin G3000
And I'm also not sure I need all this. Have always card in MFD upper slot and from time to time I download it to FlySto. Of course CAMP is one more step.
(Username Protected) -
Username ProtectedFrequent Poster
- Posts
- 85 Posts
- Thanked 50 times
- Phenom 100 Owner & Pilot
- Join Date
- Joined Oct 2020
01-09-2024, 11:35 AM #6Used this from an older post (thanks to Marcus) and it works, CAMP happy with the datas:
Go to AUX > Maintenance page. For G1000 the password is EMBG1K (NXi you don't need a password to access). There are several folders but you only need two of them (CAS_CMC & Engine). Highlight the folder and press the menu key to access copy to SD card menu. The screen will then show the copying process. After downloading you can purge the content of the folder. -
Username ProtectedMember
- Posts
- 19 Posts
- Thanked 4 times
- Phenom 100 Owner & Pilot
- Join Date
- Joined Jun 2021
01-10-2024, 09:05 AM #7I fly a P100EV with G3000, and upload the files manually to AHEAD on Embraer's TechCare website - The files you need are in the CAS CMC ENGINE and the ENGINE folders - Once I have uploaded these, they make their way to CAMP through Embraer.
jim -
Username ProtectedMember
- Posts
- 17 Posts
- Thanked 18 times
- Phenom 100 Owner & Pilot
- Join Date
- Joined Dec 2020
03-26-2024, 11:23 AM #8(Username Protected),
I fly a G1000 with NXI. Do you upload both the CMC and Engine data to AHEAD? Any reason to upload to Engine data to CAMP?
Thanks
(Username Protected)
PS...just as a side note to Embraer....There should be some sort of manual that comes with the plane that explains these things step by step. Some of us are owner operators so all this is new and confusing. I have 3 buddies all that fly 300s and none of them are on engine or parts programs so they don't do any of this stuff so they can't help out. Any info here would be great from other owner operators of the P100.
-
Username ProtectedFrequent Poster
- Posts
- 85 Posts
- Thanked 50 times
- Phenom 100 Owner & Pilot
- Join Date
- Joined Oct 2020
03-26-2024, 12:26 PM #9(Username Protected),
If the engines are under P&W program you have to send data’s to them. As described above a easy copy every month on the NXI MFD and than the two files by email to trendsupport @ campsystems.com and you get two days later a report back from P&W if there was any issue with your engines.
For JSSI no need. -
Username ProtectedFrequent Poster
- Posts
- 85 Posts
- Thanked 50 times
- Phenom 100 Owner & Pilot
- Join Date
- Joined Oct 2020
03-26-2024, 12:49 PM #11(Username Protected) is using Ahead, I’m doing as described for no cost. No need to zip, it’s very small file size, just add your tailnumber in the headline to CAMP.
-
Username ProtectedMember
- Posts
- 19 Posts
- Thanked 4 times
- Phenom 100 Owner & Pilot
- Join Date
- Joined Jun 2021
03-28-2024, 07:15 AM #14I have been doing a little searching as to how the flow of information occurs, and here is what I have found: When I download the flight data from the G3000 as described above, I upload it to AHEAD via Embraer's website, and that information is used to generate monthly billing to us for the EEC portion. That information is also forwarded to CAMP, which provides the engine monitoring and trend information for the engines, not Pratt. On the Pratt website, they make the statement "CAMP Systems International, Inc. (CAMP) delivers heightened levels of engine condition trend monitoring (ECTM) services to P&WC operators." The only thing I enter in the Pratt website is the monthly engine times solely for the purposes of generating a P&W invoice for billing.
Hope this clears things up a bit for other!
Jim -
Username ProtectedMember
- Posts
- 7 Posts
- Thanked 1 time
- Phenom 100 Owner & Pilot
- Join Date
- Joined Nov 2023
03-29-2024, 11:43 AM #16I also emailed AirSync this week and gave them the last month of my G1000 NXi logs for my 100. I've asked Eagle Creek to help me think about where a good place to mount the module come annual time since there isn't any convienant USB ports.
- Quick Links
- New Posts
- Participated
- Subscribed
- Today's Posts
- Hot This Week