Results 1 to 6 of 6
  1. Username Protected
    Member

    Posts
    20 Posts
    Thanked 9 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Jun 2021
       #1  

    getting flaps full, unfactored landing speeds and distance out of a G3000

    Does anyone know where to find this in the G3000?
  2. Username Protected
    Frequent Poster

    Posts
    98 Posts
    Thanked 40 times
    Phenom Pro Pilot
    Join Date
    Joined Oct 2020
    #2  
    Unless your 300 has software load 3305.00, you won’t have takeoff and landing data computation available. What serial number is your aircraft?
  3. Username Protected
    Member

    Posts
    20 Posts
    Thanked 9 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Jun 2021
       #3  
    717. I have the most current hw and sw loads.
  4. Username Protected
    Frequent Poster

    Posts
    85 Posts
    Thanked 21 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Apr 2023
    #4  
    What do you mean by unfactored landing speeds? That’s not a thing.

    flaps full landing speeds are available under performance > landing but you’ll need to input all the required fields to get the speeds to calculate. It’s very easy!

    If you want unfactored landing distance just set the factor to 1.0 and you will get it in the landing data tab.

    Attachments Attachments  
  5. Username Protected
    Member

    Posts
    20 Posts
    Thanked 9 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Jun 2021
       #5  
    thanks! Figured it out.
  6. Username Protected
    Member

    Posts
    1 Posts
    Thanked 0 times
    Phenom Pro Pilot
    Join Date
    Joined May 2024
    #6  
    Hello to all captains.
    I want to share with you that arriving to TUPJ, I got an amber message when configuring the speed settings saying in the Landing Data page “FIELD LENGHT EXCEED” CHK Flaps/CHK Weight. But the performance calculation for POH/AFM/QRH was within limits (15700 LB)... Then in the Unfactored Landing Distance part it was by “DEFAULT” and when I changed it to “1.0” manually, the restrictions disappeared.


    Can someone explain me why when I add 1.0 manually in the Factored Landing Distance part, the restrictions are deleted?


    Thanks

Posting Permissions