Results 1 to 5 of 5
  1. Username Protected
    Member

    Posts
    19 Posts
    Thanked 5 times
    Phenom Instructor/Mentor
    Join Date
    Joined Oct 2020
       #1  

    Nxi- #2 ahrs / adc

    Hello folks,
    It has been my recent experience operating 2 newly converted NXI 100s,
    Both had AHRS 2 and ADC 2 failures.
    Has anyone else experienced this phenomenon in newly upgraded to NXI
    100s?
    curious….
  2. Username Protected
    Really Frequent Poster

    Posts
    155 Posts
    Thanked 58 times
    Phenom 100 Owner & Pilot
    Join Date
    Joined Oct 2020
    #2  
    No problems like that here.
  3. Username Protected
    Star Contributor

    Posts
    745 Posts
    Thanked 507 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Oct 2020
    #3  
    (Username Protected),

    Odd since the AHRS and ADC are not replaced as part of the NXi upgrade. Both done at the same shop? I would check the cabling and connector pins for damage.
  4. Username Protected
    Member

    Posts
    17 Posts
    Thanked 7 times
    Phenom 100 Owner & Pilot
    Join Date
    Joined Dec 2020
    #4  
    I just had multiple adc1 faults then fail 6 months post nxi.
  5. Username Protected
    Member

    Posts
    18 Posts
    Thanked 6 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Sep 2021
    #5  
    Just a thought on this: I will get a #2 failure sometimes if the fuel truck is parked right next to my right wing prior to me applying power to the plane. Once the fuel truck pulls away, I recycle power and all is okay. Make sure nothing big and metal is near you when you power up. I've also had this occur when near a hanger.

Tags for this Thread

Posting Permissions