Results 1 to 6 of 6
  1. Username Protected
    Star Contributor

    Posts
    745 Posts
    Thanked 507 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Oct 2020
       #1  

    Proposed AD for P300 Refreshment Center Reinforcement

    The FAA today proposed an AD for P300 which requires operators to "install reinforcements on the RH refreshment center and LH forward cabinet, and to replace rivets of the floor support of the RH Refreshment Center".

    It is based on ANAC AD 2023–05–03 (attached), which itself is based on SB505-25-0046.

    The ANAC AD gives 36 mo to comply, I am assuming the FAA one will have a similar timeline.

    The FAA proposes to adopt a new airworthiness directive (AD) for certain Embraer S.A. (Embraer) Model EMB–505 airplanes. This proposed AD was prompted by analysis of certain monuments (the right-hand refreshment center and left-hand forward cabinet) that identified the need for installing structural reinforcements and replacing certain floor support rivets. This proposed AD would require installing structural reinforcements on certain monuments and replacing certain floor support rivets, as specified in an Agência Nacional de Aviação Civil (ANAC) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
    https://www.federalregister.gov/docu...r-sa-airplanes
    Attachments Attachments
  2. Username Protected
    Member

    Posts
    18 Posts
    Thanked 6 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Sep 2021
    #2  
    Any idea of the serial numbers affected?

    (Username Protected)
  3. Username Protected
    Member

    Posts
    73 Posts
    Thanked 25 times
    Phenom Instructor/Mentor
    Join Date
    Joined Oct 2020
    #3  
    Quote Original Post View Post
    Any idea of the serial numbers affected?

    (Username Protected)
    (Username Protected), the earliest SN I see is 505-0004 and the latest I see is 505-0592. The list is not "inclusive" but there are a lot listed.
  4. Username Protected
    Member

    Posts
    73 Posts
    Thanked 25 times
    Phenom Instructor/Mentor
    Join Date
    Joined Oct 2020
    #4  

    Exclamation

    Heads up! (Phenom 300)

    19 Feb 2024, Revision 2 came out and it's kind of a big deal. The original SB was issued 31 Mar 2021, and compliance time was "at the next 60 month inspection". Revision 2 changes that to "within 36 months from the original issue date" !!!! That means March 2024.

    But Embraer is (not) prepared - they tell my service center parts aren't available until July.
  5. Username Protected
    Really Frequent Poster

    Posts
    202 Posts
    Thanked 104 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Nov 2020
    #5  
    As noted on a previous thread, I had my interior overhauled in February. Would have been an excellent time to implement SB 25-0046; however, as noted above there are no parts. I checked yesterday and the "top kits" for "group 3" are pushed out to Q4.

    One other item that had me confused for a bit. There is an almost identical SB 25-0044 which affects the LEFT Forward Cabinet or the LEFT Refreshment Center. This AD was incorporated at my 10Y in 2021, thus, I only need to comply with the RIGHT Refreshement Center of SB 25-0046. Check your maintenance logs to see if your aircraft already incorporated SB 25-0044 to keep from duplicating work.
  6. Username Protected
    Member

    Posts
    73 Posts
    Thanked 25 times
    Phenom Instructor/Mentor
    Join Date
    Joined Oct 2020
    #6  
    UPDATE: Embraer now says they will abide by 36 months from the date of the AD, so that is June 2026.

Posting Permissions