Results 1 to 4 of 4
  1. Username Protected
    Member

    Posts
    2 Posts
    Thanked 0 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Nov 2020
       #1  

    G3000 audio panel issues

    Our Phenom radios (pilot or copilot) and sometimes the intercom occassionally stop transmitting after start. A battery recycle or full shutdown is required. Anyone else have this problem?
  2. Username Protected
    Star Contributor

    Posts
    745 Posts
    Thanked 507 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Oct 2020
    #2  
    Have not heard of a similar issue. Can you still receive transmissions? Are both sides affected, or just one?

    Since the intercom stops points to the audio panel/mixer, but would be odd for both to act up at the same time.
  3. Username Protected
    Member

    Posts
    2 Posts
    Thanked 0 times
    Phenom 300 Owner & Pilot
    Join Date
    Joined Nov 2020
       #3  
    Thanks (Username Protected). When it happens the most frequent one is intercom quits working and one receiver goes out.
  4. Username Protected
    Member

    Posts
    26 Posts
    Thanked 18 times
    Phenom Instructor/Mentor
    Join Date
    Joined Nov 2020
    #4  
    Hi (Username Protected),
    Had a similar issue with one of the original -100's, about ten years ago at JetSuite.
    The failure would happen just after engine start, while doing the "Gen. 1&2 Testing!" Usually a total reset would solve the problem.
    Eventually Embraer Engineering got evolved and I believe they changed the entire Comm Module.

Tags for this Thread

Posting Permissions